CK7520 series CNC lathes / Torno CNC serie CK7520 / §´§à§Ü§Ñ§â§ß§í§Ö §ã§ä§Ñ§ß§Ü§Ú §ã §¹§±§µ §ã§Ö§â§Ú§ÚCK7520
Introduction
CK7520series CNC lathe, adopts high grade cast iron, integral machine bed, slantguideways, through-hole spindle driven by large-field AC main motor anddampening design. bearings of mainspindle and of feeding screw with low noise during operation, The multi-stationpower turret indexes fast continuously in bi-direction..
This series lathe can be equipped with FANUC0i-TF, Siemens 828D or other control systems.
Features
(1) Integrated base and bed made of high grade cast iron is of high rigidity with wide rectangular hardened ways.
(2) High grade cast iron saddle and slide, plastic-coated ways, small dynamic and static friction force. Rapid traverse rate of X and Z axis is up to 12m/min and 16m/min. Wide span saddle and slide ensure large-loaded and heavy cut.
(3) The spindle runs in precision large diameter angular contact ball bearings and double -row cylindrical roller bearings, driven by heavy servo motor, and ensures extremely stiffness and large torque at low speed.
(4) Ball screws are used in X and Z axes, which are supported by Japan NSK angular contact bearings especially for screws. Therefore stiffness and heat distortion resistance of screws, and feeding accuracy are greatly improved.
(5) DM 12-station horizontal power turret from Italy ensures high accuracy, high rigidity and short tool change time.
(6) Well sealed machine electric cabinet together with air conditioner inside the cabinet guarantee correct operation of the control in high temperature and humidity ambient.
(7) Close attention is focused on edge technology. So machine guard is reliable. No chip, coolants is splashed or flies out when during heavy cut or pressure spraying of coolant.
(8) The chuck is clamped and unclamped hydraulically. The quill of tailstock is advance out and in. Both of them can be program controlled.
Specificatio
| Description | Unit | CK7520 | CK7520A | CK7520B | CK7520C |
| 500/1000/1500 (20¡±/40¡±/60¡±) | 500/1000/1500 (20¡±/40¡±/60¡±) | 500/1000/1500 (20¡±/40¡±/60¡±) | 500/750/1500 (20¡±/30¡±/60¡±) |
| Capacity | Max. swing over bed | mm(in) | ¦Õ500/¦Õ450/¦Õ450 (¦Õ19.685/¦Õ17.717/¦Õ19.685) | ¦Õ500/¦Õ450/¦Õ450 (¦Õ19.685/¦Õ17.717/¦Õ19.685) | ¦Õ500/¦Õ450/¦Õ450 (¦Õ19.685/¦Õ17.717/¦Õ19.685) | ¦Õ500/¦Õ450/¦Õ450 (¦Õ19.685/¦Õ17.717/¦Õ19.685) |
| Max. swing over slide | mm(in) | ¦Õ320(12.598) | ¦Õ320(12.598) | ¦Õ320(12.598) | ¦Õ240(9.449) |
| Max. turning dia. | mm(in) | ¦Õ370(14.567) | ¦Õ370(14.567) | ¦Õ370(14.567) | ¦Õ370(14.567) |
| Max. turning length | mm(in) | 500/1000/1500 (19.685/39.37/59.055) | 500/1000/1500 (19.685/39.37/59.055) | 500/1000/1500 (19.685/39.37/59.055) | 500/750/1000 (19.685/29.528/39.37) |
| Max. bar dia. | mm(in) | ¦Õ51(2) | ¦Õ51(2) | ¦Õ73(2.87) | ¦Õ51(2) |
| Spindle | Spindle nose | | A2-6 | A2-6 | A2-8 | A2-6 |
| Spindle thru-hole | mm(in) | ¦Õ62(2.441) | ¦Õ62(2.441) | ¦Õ87(3.425) | ¦Õ62(2.441) |
| Chuck dia. | mm(in) | ¦Õ210(8) | ¦Õ210(8) | ¦Õ254(10) | ¦Õ210(8) |
| Spindle speed | r/min(rpm) | 40-4000 | 75-2500 | 30-3000 | 40-4000 |
| Power of spindle motor (cont./30 min) | kW(hp) | 11/15(15/20.4) | 15(20.4) | 11/15(15/20.4) | 11/15(15/20.4) |
| Tailstock | Quill dia. | mm(in) | ¦Õ90(3.543) | ¦Õ90(3.543) | ¦Õ90(3.543) | ¦Õ90(3.543) |
| Quill travel | mm(in) | 100(3.937) | 100(3.937) | 100(3.937) | 100(3.937) |
| Taper of center (standard/live spindle structure) | | Morse No.5/4 | Morse No.5/4 | Morse No.5/4 | Morse No.5/4 |
| Feed | Travel X/Z | mm(in) | 210/550 (8.268/21.654) 210/1010 (8.268/39.764) 210/1550 (8.268/61.024) | 210/550 (8.268/21.654) 210/1010 (8.268/39.764) 210/1550 (8.268/61.024) | 210/550 (8.268/21.654) 210/1010 (8.268/39.764) 210/1550 (8.268/61.024) | 210/550 (8.268/21.654) 210/1010 (8.268/39.764) 210/1550 (8.268/61.024) |
| Rapid traverse X/Z | m/min(ipm) | 12/16(472/630) | 12/16(472/630) | 12/16(472/630) | 24/24(945/945) (500/1000) 24/32(945/1259) £¨750£© |
| Turret | Number of stations | | 12/8 | 12/8 | 12/8 | 12/8 |
| Tool setting size (turning/boring) | mm | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 |
| Others | Slant angle of bed | | 45¡ã | 45¡ã | 45¡ã | 45¡ã |
| Power capacity | kVA | 45 | 30 | 45 | 45 |
| Dimension(L×W×H) | mm(in) | 2860×1830×2020 (112.6×72×79.5 ) 3790×1850×2050 (149.2×72×80.7 ) 4600×1850×2050 (181.1×72×80.7 ) | 2860×1830×2020 (112.6×72×79.5 ) 3790×1850×2050 (149.2×72×80.7 ) 4600×1850×2050 (181.1×72×80.7 ) | 2860×1830×2020 (112.6×72×79.5 ) 3790×1850×2050 (149.2×72×80.7 ) 4600×1850×2050 (181.1×72×80.7 ) | 2860×1830×2020 (112.6×72×79.5 ) 3230×1830×2020 (127.2×72×79.5 ) 3790×1850×2050 (149.2×72×79.5 ) |
| Machine weight | kg(lbs) | 4500(9,923) | 4500(9,923) | 4500(9,923) | 5000(11025) |
============================================================================================
Descripci¨®n
Torno CNC Serie CK7520, su fuerza, din¨¢mica yrigidez est¨¢tica, mec¨¢nica de las piezas principales, guardia y sistema derefrigeraci¨®n est¨¢n avanzados en el dise?o. Este torno serie, dise?ada con altaresistencia a las vibraciones, adopta el alto grado de hierro fundido, de unasola pieza de la base de la cama, gu¨ªas inclinadas, una alta precisi¨®n a trav¨¦sde hoyos husillo accionado por el motor principal de CA de gran campo. piezasclave como rodamientos de husillo principal y de la alimentaci¨®n de tornilloson todos los productos extranjeros famosos. Los puestos m¨²ltiples ¨ªndicestorreta r¨¢pida y continua con una alta repetibilidad y herramienta cambiospr¨®ximamente. El torno puede estar equipado con FANUC 0i-TD, FANUC 0i mate-TD,Siemens 828D, Dasen 3i y etc por encargo. u otros sistemas de control de lasmejores marcas de China y pa¨ªses extranjeros (piezas hidr¨¢ulicas, unidades delubricaci¨®n y mandriles que son de buena calidad de los mercados nacionales yextranjeros).
El torno est¨¢ dise?ado con aspecto ¨²nico, elpanel de f¨¢cil accionamiento, guardia completo cerrado, lo que puede evitar lafuga de agua, electricidad y petr¨®leo con eficacia. Es el producto m¨¢s potentede su clase debido a la gran potencia, excelente precisi¨®n y alta rendimiento.
Especificaciones
<!--[if !supportMisalignedColumns]--> <!--[endif]-->
ITEMS | Unidad | CK7520 | CK7520A | CK7520B | CK7520C |
Capacidad | Max. di¨¢metro de volteo sobre la bancada | m | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ500/¦Õ450 |
Max. di¨¢metro de volteo sobre el coche | mm | ¦Õ320 | ¦Õ320 | ¦Õ320 | ¦Õ240 |
Max. di¨¢metro torneado | mm | ¦Õ370 | ¦Õ370 | ¦Õ370 | ¦Õ370 |
Max. Longitud torneada | mm | 500/1000/1500 | 500/1000/1500 | 500/1000/1500 | 500/750/1000 |
Dia. m¨¢ximo de la barra | mm | ¦Õ51 | ¦Õ51 | ¦Õ73 | ¦Õ51 |
Husillo | Tipo de nariz del husillo | | A2-6 | A2-6 | A2-8 | A2-6 |
Di¨¢metro del husillo | mm | ¦Õ62 | ¦Õ62 | ¦Õ87 | ¦Õ62 |
Di¨¢metro mandril | mm | ¦Õ210 | ¦Õ210 | ¦Õ254 | ¦Õ210 |
Velocidad del husillo | r/min | 40-4000 | 75-2500 | 30-3000 | 40-4000 |
Potencia motor del husillo(continuous/30min) | kW | 11/15 | 15 | 11/15 | 11/15 |
Contrapunta | Diametro de la camisa | mm | ¦Õ90 | ¦Õ90 | ¦Õ90 | ¦Õ90 |
Desplazamiento pinula | mm | 100 | 100 | 100 | 100 |
cono del centro£¨Est¨¢ndar/vivo£© | | Morse No.5/4 | Morse No.5/4 | MorseNo.5/4 | Morse No.5/4 |
Avances | Recorrido eje X/Z | mm | 210/550 210/1010 210/1550 | 210/550 210/1010 210/1550 | 210/550 210/1010 210/1550 | 210/550 210/780 210/1010 |
Avance rapido eje X/Z | m/min | 12/16 | 12/16 | 12/16 | 24/24(500/1000) 24/32£¨750£© |
Torreta | Estaciones de herramienta | | 12/8 | 12/8 | 12/8 | 12/8 |
Tama?o de herramienta(torneado/aburrido) | mm | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 |
Otros | Grado de inclinaci¨®n de la cama | | 45¡ã | 45¡ã | 45¡ã | 45¡ã |
Fuente de potencia | kVA | 45 | 30 | 45 | 45 |
Dimensiones(LxWxH) | mm | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3230×1830 ×2020 3790×1850 ×2050 |
Peso | kg | 4500 | 4500 | 4500 | 5000 |
| | | | | | | | | | | |
=============================================================================================================================================================
§£§Ó§Ö§Õ§Ö§ß§Ú§Ö
CK7520 §ã§Ö§â§Ú§Ú CNC §ä§à§Ü§Ñ§â§ß§í§Ö, §Ö§Ö§á§â§à§é§ß§à§ã§ä§î, §Õ§Ú§ß§Ñ§Þ§Ú§é§Ö§ã§Ü§à§Û §Ú §ã§ä§Ñ§ä§Ú§é§Ö§ã§Ü§à§Û §Ø§Ö§ã§ä§Ü§à§ã§ä§Ú, §Þ§Ö§ç§Ñ§ß§Ú§Ü§Ñ §à§ã§ß§à§Ó§ß§í§ç §é§Ñ§ã§ä§Ö§Û,§à§ç§â§Ñ§ß§ß§Ú§Ü §Ú §à§ç§Ý§Ñ§Ø§Õ§Ñ§ð§ë§Ö§Û §ã§Ú§ã§ä§Ö§Þ§í §â§Ñ§Ù§Ó§Ú§ä§í §Ó §Õ§Ú§Ù§Ñ§Û§ß§Ö. §¿§ä§à§ä §ã§ä§Ñ§ß§à§Ü §ã§Ö§â§Ú§Ú,§â§Ñ§Ù§â§Ñ§Ò§à§ä§Ñ§ß§í §ã §Ó§í§ã§à§Ü§Ú§Þ §Ó§Ú§Ò§â§à§á§â§à§é§ß§à§ã§ä§î, §á§â§Ú§ß§Ú§Þ§Ñ§Ö§ä §Ó§í§ã§à§Ü§à§Ü§Ñ§é§Ö§ã§ä§Ó§Ö§ß§ß§à§Ô§à §é§å§Ô§å§ß§Ñ,§à§Õ§ß§Ñ §é§Ñ§ã§ä§î §Ü§â§à§Ó§Ñ§ä§Ú §Ò§Ñ§Ù§í, §ß§Ñ§Ü§Ý§à§ß§ß§Ñ§ñ §ß§Ñ§á§â§Ñ§Ó§Ý§ñ§ð§ë§Ú§Ö, §Ó§í§ã§à§Ü§à§Û §ä§à§é§ß§à§ã§ä§î§ð §é§Ö§â§Ö§Ù§à§ä§Ó§Ö§â§ã§ä§Ú§Ö §ê§á§Ú§ß§Õ§Ö§Ý§ñ, §Õ§Ó§Ú§Ø§Ú§Þ§í§Û §Ò§à§Ý§î§ê§à§Ö §á§à§Ý§Ö §à§ã§ß§à§Ó§ß§à§Û §Õ§Ó§Ú§Ô§Ñ§ä§Ö§Ý§î §á§Ö§â§Ö§Þ§Ö§ß§ß§à§Ô§à §ä§à§Ü§Ñ. §¬§Ý§ð§é§Ö§Ó§í§Ö§é§Ñ§ã§ä§Ú§Ó§ã§Ö §Ú§Ù§Ó§Ö§ã§ä§ß§í§Ö §Ú§ß§à§ã§ä§â§Ñ§ß§ß§í§Ö §ä§à§Ó§Ñ§â§í,§ß§Ñ§á§â§Ú§Þ§Ö§â§í: §á§à§Õ§ê§Ú§á§ß§Ú§Ü§Ú §ê§á§Ú§ß§Õ§Ö§Ý§ñ §Ú §á§à§Õ§ê§Ú§á§ß§Ú§Ü§Ú §á§à§Õ§Ñ§ð§ë§à§Ô§à §Ó§Ú§ß§ä§Ñ. §®§ß§à§Ô§à§á§à§Ù§Ú§è§Ú§à§ß§ß§í§Ö §ã§å§á§á§à§â§ä §Ú§ß§Õ§Ö§Ü§ã§í §Ò§í§ã§ä§â§à, §Ú §ß§Ö§á§â§Ö§â§í§Ó§ß§à §ã §Ó§í§ã§à§Ü§à§Û §á§à§Ó§ä§à§â§ñ§Ö§Þ§à§ã§ä§Ú, §Ú §Ú§Ù§Þ§Ö§ß§Ö§ß§Ú§ñ §Ú§ß§ã§ä§â§å§Þ§Ö§ß§ä§ß§Ö§á§à§ã§â§Ö§Õ§ã§ä§Ó§Ö§ß§ß§à. §´§à§Ü§Ñ§â§ß§í§Û §ã§ä§Ñ§ß§à§Ü §Þ§à§Ø§Ö§ä §Ò§í§ä§î §à§ã§ß§Ñ§ë§Ö§ß FANUC 0i-§´§¥, FANUC 0i Mate-§´§¥,Siemens 828D, DASEN 3i §Ú §ä.§Õ. §á§à §Ù§Ñ§á§â§à§ã§å. §Ú§Ý§Ú §Õ§â§å§Ô§Ú§ç§ã§Ú§ã§ä§Ö§Þ §å§á§â§Ñ§Ó§Ý§Ö§ß§Ú§ñ §ä§à§á §Ò§â§Ö§ß§Õ §Ú§Ù §¬§Ú§ä§Ñ§ñ §Ú §Ù§Ñ§â§å§Ò§Ö§Ø§ß§í§ç §ã§ä§â§Ñ§ß (§Ô§Ú§Õ§â§Ñ§Ó§Ý§Ú§é§Ö§ã§Ü§à§Û §é§Ñ§ã§ä§Ú,§ã§Þ§Ñ§Ù§Ü§Ñ §Ö§Õ§Ú§ß§Ú§è §Ú §á§Ñ§ä§â§à§ß§í, §Ü§à§ä§à§â§í§Ö §ç§à§â§à§ê§Ö§Ô§à §Ü§Ñ§é§Ö§ã§ä§Ó§Ñ §à§ä §Ó§ß§å§ä§â§Ö§ß§ß§Ú§ç §Ú §Ó§ß§Ö§ê§ß§Ú§ç§â§í§ß§Ü§Ñ§ç).
<!--[if !supportLineBreakNewLine]--><!--[endif]--> §³§ä§Ñ§ß§à§Ü §â§Ñ§Ù§â§Ñ§Ò§à§ä§Ñ§ß §å§ß§Ú§Ü§Ñ§Ý§î§ß§í§Û §Ó§ß§Ö§ê§ß§Ú§Û§Ó§Ú§Õ, §Ý§Ö§Ô§Ü§à §å§á§â§Ñ§Ó§Ý§ñ§Ö§Þ§Ñ§ñ §Ô§â§å§á§á§Ñ, §á§â§Ú§Ý§Ñ§Ô§Ñ§Ö§ä§ã§ñ §á§à§Ý§ß§í§Û §à§ç§â§Ñ§ß§ß§Ú§Ü, §Ü§à§ä§à§â§í§Û §Þ§à§Ø§Ö§ä§ï§æ§æ§Ö§Ü§ä§Ú§Ó§ß§à §á§â§Ö§Õ§à§ä§Ó§â§Ñ§ä§Ú§ä§î §å§ä§Ö§é§Ü§Ú §Ó§à§Õ§í, §ï§Ý§Ö§Ü§ä§â§Ú§é§Ö§ã§ä§Ó§à §Ú §Þ§Ñ§ã§Ý§à. §¿§ä§à §ã§Ñ§Þ§í§Û §Þ§à§ë§ß§í§Û §á§â§à§Õ§å§Ü§ä §Ó §ã§Ó§à§Ö§Þ §Ü§Ý§Ñ§ã§ã§Ö §Ò§Ý§Ñ§Ô§à§Õ§Ñ§â§ñ §Ò§à§Ý§î§ê§à§Û§Þ§à§ë§ß§à§ã§ä§Ú, §à§ä§Ý§Ú§é§ß§Ñ§ñ §ä§à§é§ß§à§ã§ä§î §Ú §Ó§í§ã§à§Ü§Ñ§ñ §á§â§à§Ú§Ù§Ó§à§Õ§Ú§ä§Ö§Ý§î§ß§à§ã§ä§î.
<!--[if !supportLineBreakNewLine]--><!--[endif]--> §´§Ö§ç§ß§Ú§é§Ö§ã§Ü§Ú§Ö§ç§Ñ§â§Ñ§Ü§ä§Ö§â§Ú§ã§ä§Ú§Ü§Ú
§±§å§ß§Ü§ä | §Ö§Õ§Ú§ß§Ú§è§Ñ | CK7520 | CK7520A | CK7520B | CK7520C |
§³§á§à§ã§à§Ò§ß§à§ã§ä§î | §®§Ñ§ç. §á§à§Ó§à§â§à§ä§ß§í§Û §Õ§Ú§Ñ§Þ§Ö§ä§â §ß§Ñ§Õ §ã§ä§Ñ§ß§Ú§ß§à§Û | §Þ§Þ | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ450/¦Õ450 | ¦Õ500/¦Õ500/¦Õ450 |
§®§Ñ§ç. §á§à§Ó§à§â§à§ä§ß§í§Û §Õ§Ú§Ñ§Þ§Ö§ä§â §ß§Ñ§Õ §Ü§Ñ§â§Ö§ä§Ü§à§Û | §Þ§Þ | ¦Õ320 | ¦Õ320 | ¦Õ320 | ¦Õ240 |
§®§Ñ§ç. §ä§à§Ü§Ñ§â§ß§í§Û §Õ§Ú§Ñ§Þ§Ö§ä§â | §Þ§Þ | ¦Õ370 | ¦Õ370 | ¦Õ370 | ¦Õ370 |
§®§Ñ§ç. §ä§à§Ü§Ñ§â§ß§í§Û §Õ§Ý§Ú§ß§Ñ | §Þ§Þ | 500/1000/1500 | 500/1000/1500 | 500/1000/1500 | 500/750/1000 |
§®§Ñ§ç. §Õ§Ú§Ñ§Þ§Ö§ä§â §á§â§å§ä§à§Ü | §Þ§Þ | ¦Õ51 | ¦Õ51 | ¦Õ73 | ¦Õ51 |
§ê§á§Ú§ß§Õ§Ö§Ý§î | §±§Ö§â§Ö§Õ§ß§Ú§Û §Ü§à§ß§Ö§è §ê§á§Ú§ß§Õ§Ö§Ý§ñ | | A2-6 | A2-6 | A2-8 | A2-6 |
§¥§Ú§Ñ§Þ§Ö§ä§â §à§ä§Ó§Ö§â§ã§ä§Ú§ñ §ê§á§Ú§ß§Õ§Ö§Ý§ñ | §Þ§Þ | ¦Õ62 | ¦Õ62 | ¦Õ87 | ¦Õ62 |
§¥§Ú§Ñ§Þ§Ö§ä§â §á§Ñ§ä§â§à§ß§Ñ | §Þ§Þ | ¦Õ210 | ¦Õ210 | ¦Õ254 | ¦Õ210 |
§³§Ü§à§â§à§ã§ä§Ú §ê§á§Ú§ß§Õ§Ö§Ý§ñ | §à§Ò/§Þ§Ú§ß | 40-4000 | 75-2500 | 30-3000 | 40-4000 |
§ï§Ý§Ö§Ü§ä§â§à§ï§ß§Ö§â§Ô§Ú§ñ §¤§Ý§Ñ§Ó§ß§à§Ô§à §Õ§Ó§Ú§Ô§Ñ§ä§Ö§Ý§ñ (§ß§Ö§á§â§Ö§â§í§Ó§ß§í§Û/30 §Þ§Ú§ß) | §Ü§£§ä | 11/15 | 15 | 11/15 | 11/15 |
§Ù§Ñ§Õ§ß§ñ§ñ §Ò§Ñ§Ò§Ü§Ñ | §¥§Ú§Ñ§Þ§Ö§ä§â §á§Ú§ß§à§Ý§í | §Þ§Þ | ¦Õ90 | ¦Õ90 | ¦Õ90 | ¦Õ90 |
§ç§à§Õ §á§Ú§ß§à§Ý§ñ | §Þ§Þ | 100 | 100 | 100 | 100 |
§¬§à§ß§å§ã §è§Ö§ß§ä§â§Ñ (§ã§ä§Ñ§ß§Õ§Ñ§â§ä/§Ø§Ú§Ó §ê§á§Ú§ß§Õ§Ö§Ý§î) | | §®§°§²§³ No.5/4 | §®§°§²§³ No.5/4 | §®§°§²§³ No.5/4 | §®§°§²§³ No.5/4 |
§±§à§Õ§Ñ§é§Ñ | §·§à§Õ X/Z | §Þ§Þ | 210/550 210/1010 210/1550 | 210/550 210/1010 210/1550 | 210/550 210/1010 210/1550 | 210/550 210/780 210/1010 |
§³§Ü§à§â§à§ã§ä§î §¢§í§ã§ä§â§Ñ§ñ §á§à§Õ§Ñ§é§Ñ X / Z | §Þ/§Þ§Ú§ß | 12/16 | 12/16 | 12/16 | 24/24(500/1000) 24/32£¨750£© |
§ã§å§á§á§à§â§ä | §¬§à§Ý§Ú§é§Ö§ã§ä§Ó§à §ã§ä§Ñ§ß§è§Ú§ñ §Õ§Ý§ñ §ã§å§á§á§à§â§ä§Ñ | | 12/8 | 12/8 | 12/8 | 12/8 |
§²§Ñ§Ù§Þ§Ö§â §ª§ß§ã§ä§â§å§Þ§Ö§ß§ä§Ñ | §Þ§Þ | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 | 25×25/¦Õ40 |
§¥§â§å§Ô§à§Ö | §³§ä§Ö§á§Ö§ß§î §ß§Ñ§Ü§Ý§à§ß§ß§à§Û §ã§ä§Ñ§ß§Ú§ß§í | | 45¡ã | 45¡ã | 45¡ã | 45¡ã |
§ï§Ý§Ö§Ü§ä§â§à§ï§ß§Ö§â§Ô§Ú§ñ §á§Ñ§Õ§Ñ§é§Ú | §Ü§£§Ñ | 45 | 30 | 45 | 45 |
§¤§Ñ§Ò§Ñ§â§Ú§ä§ß§í§Ö §â§Ñ§Ù§Þ§Ö§â§í (§¥ × §º × §Ó) | §Þ§Þ | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3790×1850 ×2050 4600×1850 ×2050 | 2860×1830 ×2020 3230×1830 ×2020 3790×1850 ×2050 |
§£§Ö§ã | §Ü§Ô | 4500 | 4500 | 4500 | 5000 |
